october 2015 rf components smd 7x7mm * * dimensions code jis isolator cu4s0701 series
rf components ? all specifications are subject to change without notice. ? before using these products, be sure to request the delivery specifications. 20151001 / rf_isolator_cu4s0701_en.fm isolator smd part number construction direction of circulation clockwise(cw): a counterclockwise(ccw): b temperature range product compatible with rohs directive overview of cu4s0701 series cu4s0701 ? t- - series name direction center frequency control number (mhz) acw cut off after the decimal point b ccw marking out in marking in out operating temperature storage temperature c c C35 to +85 C40 to +85 rohs directive compliant product: see the following for more details related to rohs directive compliant products. http://produ ct.tdk.com/en/environment/rohs/
rf components ? all specifications are subject to change without notice. ? before using these products, be sure to request the delivery specifications. 20151001 / rf_isolator_cu4s0701_en.fm cu4s0701 series shapes and dimensions recommended land pattern recommended pc board pattern 2.50.20 ( under 1ghz ) 2.750.25 ( over 1ghz ) terminal ( au plating ) metal parts other than a terminal. ( gnd electric potential ) tolerance unless otherwise specified: 0.2 coplanarity : 0.1max. [bottom view] ( 1 ) ( 3 ) ( 4 ) ( 2 ) ( 1 ) ( 3 ) ( 4 ) ( 2 ) ( 1 ) ( 3 ) ( 4 ) ( 2 ) 0.40.15 [top view] [marking] marking marking clockwise(cw): a counterclockwise(ccw): b dimensions in mm 1 2 3 4 terminal functions in ground ground out out ground ground in rotation counter clockwise clockwise 7.00.3 0.40.15 1.5 1.0 2.5 2.25 7.00.3 4.4 4.75 7.00.3 5.8 1.9 3.1 1.4 1.1 1.1 dimensions in mm 1min. 1min. ( 1.4 ) ( 1.1 ) 1min. 5.8 dimensions in mm connect to 50 stripline with i/o land. i/o i/o gnd isolator outline
rf components ? all specifications are subject to change without notice. ? before using these products, be sure to request the delivery specifications. 20151001 / rf_isolator_cu4s0701_en.fm cu4s0701 series electrical characteristics characteristic impedance ( ) : 50(nominal) 4 to be kept below +85deg.c at the bottom surface frequency range center frequency isolation insertion loss v. s . w. r . zo=50 handling power reflection power height part number (mhz) (mhz) (db) (db) (w) (w) 4 (mm) min. max. max. max. max. clockwise counterclockwise 699 to 716 707.5 10.5 0.70 1.55 10 2 2.500.20 cu4s0701at-707-00 cu4s0701bt-707-00 704 to 716 710 10.5 0.70 1.55 10 2 2.500.20 cu4s0701at-710-00 cu4s0701bt-710-00 716 to 728 722 10.5 0.70 1.55 10 2 2.500.20 cu4s0701at-722-00 cu4s0701bt-722-00 703 to 748 725.5 8.0 1.20 1.70 10 2 2.500.20 cu4s0701at-725-00 cu4s0701bt-725-00 718 to 748 733 8.0 1.20 1.70 10 2 2.500.20 cu4s0701at-733-00 cu4s0701bt-733-00 729 to 746 737.5 10.5 0.70 1.55 10 2 2.500.20 cu4s0701at-737-00 cu4s0701bt-737-00 734 to 746 740 10.5 0.70 1.55 10 2 2.500.20 cu4s0701at-740-00 cu4s0701bt-740-00 746 to 756 751 13.0 0.70 1.50 10 2 2.500.20 cu4s0701at-751-00 cu4s0701bt-751-00 758 to 768 763 13.0 0.70 1.50 10 2 2.500.20 cu4s0701at-763-00 cu4s0701bt-763-00 758 to 803 780.5 8.0 1.20 1.70 10 2 2.500.20 CU4S0701AT-780-00 cu4s0701bt-780-00 777 to 787 782 13.0 0.70 1.50 10 2 2.500.20 cu4s0701at-782-00 cu4s0701bt-782-00 773 to 803 788 8.0 1.20 1.70 10 2 2.500.20 cu4s0701at-788-00 cu4s0701bt-788-00 788 to 798 793 13.0 0.70 1.50 10 2 2.500.20 cu4s0701at-793-00 cu4s0701bt-793-00 791 to 821 806 13.0 0.80 1.60 10 2 2.500.20 cu4s0701at-806-00 cu4s0701bt-806-00 807 to 824 815.5 13.0 0.80 1.60 10 2 2.500.20 cu4s0701at-815-00 cu4s0701bt-815-00 815 to 830 822.5 14.0 0.70 1.50 10 2 2.500.20 cu4s0701at-822-00 cu4s0701bt-822-00 815 to 845 830 13.0 0.80 1.60 10 2 2.500.20 cu4s0701at-830-00 cu4s0701bt-830-00 814 to 849 831.5 13.0 0.80 1.70 10 2 2.500.20 cu4s0701at-831-00 cu4s0701bt-831-00 824 to 849 836.5 14.0 0.70 1.50 10 2 2.500.20 cu4s0701at-836-00 cu4s0701bt-836-00 830 to 845 837.5 14.0 0.70 1.50 10 2 2.500.20 cu4s0701at-837-00 cu4s0701bt-837-00 832 to 862 847 13.0 0.80 1.60 10 2 2.500.20 cu4s0701at-847-00 cu4s0701bt-847-00 852 to 869 860.5 14.0 0.70 1.50 10 2 2.500.20 cu4s0701at-860-00 cu4s0701bt-860-00 860 to 875 867.5 14.0 0.70 1.50 10 2 2.500.20 cu4s0701at-867-00 cu4s0701bt-867-00 860 to 890 875 13.0 0.80 1.60 10 2 2.500.20 cu4s0701at-875-00 cu4s0701bt-875-00 859 to 894 876.5 13.0 0.80 1.60 10 2 2.500.20 cu4s0701at-876-00 cu4s0701bt-876-00 869 to 894 881.5 14.0 0.70 1.50 10 2 2.500.20 cu4s0701at-881-00 cu4s0701bt-881-00 875 to 890 882.5 14.0 0.70 1.50 10 2 2.500.20 cu4s0701at-882-00 cu4s0701bt-882-00 880 to 915 897.5 13.0 0.80 1.60 10 2 2.500.20 cu4s0701at-897-00 cu4s0701bt-897-00 900 to 915 907.5 14.0 0.70 1.50 10 2 2.500.20 cu4s0701at-907-00 cu4s0701bt-907-00 925 to 960 942.5 13.0 0.80 1.50 10 2 2.500.20 cu4s0701at-942-00 cu4s0701bt-942-00 945 to 960 952.5 14.0 0.70 1.50 10 2 2.500.20 cu4s0701at-952-00 cu4s0701bt-952-00 1427.9 to 1462.9 1445.4 13.0 0.75 1.50 10 2 2.750.25 cu4s0701at-1445-00 cu4s0701bt-1445-00 1475.9 to 1510.9 1493.4 13.0 0.75 1.50 10 2 2.750.25 cu4s0701at-1493-00 cu4s0701bt-1493-00 1525 to 1559 1542 13.0 0.75 1.50 10 2 2.750.25 cu4s0701at-1542-00 cu4s0701bt-1542-00 1626.5 to 1660.5 1643.5 14.0 0.80 1.50 10 2 2.750.25 cu4s0701at-1643-00 cu4s0701bt-1643-00 1710 to 1785 1747.5 14.0 0.80 1.50 10 2 2.750.25 cu4s0701at-1747-00 cu4s0701bt-1747-00 1749.9 to 1784.9 1767.4 15.0 0.75 1.50 10 2 2.750.25 cu4s0701at-1767-00 cu4s0701bt-1767-00 1805 to 1880 1842.5 14.0 0.80 1.50 10 2 2.750.25 cu4s0701at-1842-00 cu4s0701bt-1842-00 1844.9 to 1879.9 1862.4 15.0 0.75 1.50 10 2 2.750.25 cu4s0701at-1862-00 cu4s0701bt-1862-00 1850 to 1910 1880 14.0 0.80 1.50 10 2 2.750.25 cu4s0701at-1880-00 cu4s0701bt-1880-00 1850 to 1915 1882.5 14.0 0.80 1.50 10 2 2.750.25 cu4s0701at-1882-00 cu4s0701bt-1882-00 1880 to 1920 1900 15.0 0.75 1.50 10 2 2.750.25 cu4s0701at-1900-00 cu4s0701bt-1900-00 1920 to 1980 1950 14.0 0.80 1.50 10 2 2.750.25 cu4s0701at-1950-00 cu4s0701bt-1950-00 1930 to 1990 1960 14.0 0.80 1.50 10 2 2.750.25 cu4s0701at-1960-00 cu4s0701bt-1960-00 1930 to 1995 1962.5 14.0 0.80 1.50 10 2 2.750.25 cu4s0701at-1962-00 cu4s0701bt-1962-00 2010 to 2025 2017.5 15.0 0.70 1.50 10 2 2.750.25 cu4s0701at-2017-00 cu4s0701bt-2017-00 2110 to 2170 2140 15.0 0.80 1.50 10 2 2.750.25 cu4s0701at-2140-00 cu4s0701bt-2140-00 2305 to 2315 2310 15.0 0.65 1.50 10 2 2.750.25 cu4s0701at-2310-00 cu4s0701bt-2310-00 2300 to 2400 2350 14.0 0.80 1.50 10 2 2.750.25 cu4s0701at-2350-00 cu4s0701bt-2350-00 2350 to 2360 2355 15.0 0.65 1.50 10 2 2.750.25 cu4s0701at-2355-00 cu4s0701bt-2355-00 2500 to 2570 2535 15.0 0.80 1.50 10 2 2.750.25 cu4s0701at-2535-00 cu4s0701bt-2535-00 2496 to 2690 2593 14.0 0.90 1.50 10 2 2.750.25 cu4s0701at-2593-00 cu4s0701bt-2593-00 2570 to 2620 2595 15.0 0.80 1.50 10 2 2.750.25 cu4s0701at-2595-00 cu4s0701bt-2595-00 2620 to 2690 2655 15.0 0.80 1.50 10 2 2.750.25 cu4s0701at-2655-00 cu4s0701bt-2655-00
rf components ? all specifications are subject to change without notice. ? before using these products, be sure to request the delivery specifications. 20151001 / rf_isolator_cu4s0701_en.fm cu4s0701 series packaging style reel dimensions tape dimensions package quantity a0 b0 d0 e f p0 p1 p2 w k0 t 7.60.1 7.60.1 1.5+0.1/C0 1.750.1 7.50.1 4.00.1 12.00.1 2.00.1 16.0+0.3/C0.1 3.00.1 0.30.05 standard package quantity (pieces/reel) 1000 330 dimensions in mm fe w p0 p2 d0 p1 a0 t b0 k0 dimensions in mm reel side pulling side gnd i/o gnd i/o
rf components ? all specifications are subject to change without notice. ? before using these products, be sure to request the delivery specifications. 20151001 / rf_isolator_cu4s0701_en.fm cu4s0701 series recommended reflow profile soaking working soldering peak temp. time temp. time temp. time temp. t1 t2 t1 t3 t2 t4 t3 t5 150c 180c 60 to 120s 230c 30 to 60s 250c within 10s 260c max. t3 t1 soaking t2 working t3 t3 t4 t4 t5 t2 t1 t: time soldering t: temperature peak
rf components ? all specifications are subject to change without notice. ? before using these products, be sure to request the delivery specifications. 20151001 / rf_isolator_cu4s0701_en.fm reminders for using these products before using these products, be sure to request the delivery specifications. safety reminders please pay sufficient attention to the warnings for safe designing when using these products. please do not bring the magnet close to the product (recommending is separati ng to 50cm or more). an electric characteristic might be deteriorated. the magnetic field of 5mt or more must not go into the product when you make the magnet approach. moreover, please do not touch a soft magnetic material such as iron (recommending is separating to 10mm or more). an electric characteristic might be deteriorated. an electric characteristic changes when bringing it close within 10mm(reversible change). there is a leakage of some magnetism (0.3t or less) from the product. the products listed on this catalog are intended for use in general electronic equipment (av equipment, telecommunications equi pment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. the products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. please understand that we are not responsible for any damage or liability caused by use of the products in any of the applicati ons below or for any other use exceeding the range or conditions set forth in this catalog. (1) aerospace/aviation equipment (2) transportation equipment (cars, electric trains, ships, etc.) (3) medical equipment (4) power-generation control equipment (5) atomic energy-related equipment (6) seabed equipment (7) transportation control equipment (8) public information-processing equipment (9) military equipment (10) electric heating apparatus, burning equipment (11) disaster prevention/crime prevention equipment (12) safety equipment (13) other applications that are not considered general-purpose applications when using this product in general-purpose applications, you are kindly requested to take into consideration securing protectio n circuit/ equipment or providing backup circuits, etc., to ensure higher safety. reminders
|
